AgriMotion Engineering
    PM-KUSUM Scheme Consulting by AgriMotion
    PM-KUSUM

    PM-KUSUM — Solar Pumps & Feeder Solarisation up to 60% Subsidy

    Pradhan Mantri Kisan Urja Suraksha evam Utthaan Mahabhiyan (PM-KUSUM) — Component A (feeder-level solar), Component B (standalone solar pumps) and Component C (grid-connected) for de-dieselisation and farm income diversification.
    30 + 30%
    Centre + State
    3 – 10 HP
    Pump Range
    500 kWp – 2 MW
    Feeder Range
    4 – 6 yrs
    Payback
    At a glance
    • Up to 60% subsidy
    • Components A / B / C
    • MNRE empanelled vendors
    • Net-metering support
    Talk to an engineer · +91 75799 75795

    In short.

    Component A: feeder-level solar plants (500 kWp–2 MW) on barren/farmland with PPA to DISCOM. Component B: standalone off-grid solar pumps (3–10 HP) for farmers without grid. Component C: grid-connected solarisation of existing electric pumps with surplus power exported to DISCOM.

    By Updated
    Overview

    India’s flagship farm-solar scheme — pumps, feeders and grid power

    PM-KUSUM has three components. Component A solarises agriculture feeders at 500 kWp – 2 MW scale. Component B provides 30%+30% subsidy for standalone off-grid solar pumps (3–10 HP). Component C is grid-connected solarisation of existing pumps with surplus power sold to DISCOM. AgriMotion handles state-portal filing, MNRE-empanelled vendor coordination and end-to-end installation.

    What you get
    • 01Component A: feeder-level solar (500 kWp–2 MW), farmer/developer/CFA model
    • 02Component B: standalone solar pumps — 30% Centre + 30% State + 30% loan + 10% farmer
    • 03Component C: grid-connected pump solarisation with DISCOM net-metering
    • 04MNRE-empanelled solar modules, controllers, inverters
    • 05State nodal agency (SNA) portal filing
    • 065-year comprehensive maintenance bundled with installation
    Scope of work

    What’s included in an AgriMotion project.

    A typical end-to-end delivery covers planning through post-handover support.

    Scope my project

    Standalone Solar Pumps

    3–10 HP AC/DC pumps with MNRE-empanelled modules, controllers and GI structures.

    02

    Grid-Connected Solarisation

    Existing grid-pump solarisation with surplus power exported to DISCOM under PPA.

    03

    Feeder Solarisation

    500 kWp–2 MW solar plants supplying agri feeder under Component A model.

    04

    SNA Portal Filing

    State Nodal Agency online application, document upload, subsidy DBT setup.

    05

    Net-Meter / PPA

    DISCOM net-metering or Power Purchase Agreement coordination.

    Drip + Pump Integration

    Optional drip-irrigation coupling with pressure regulation for high-value crops.

    Project process

    From enquiry to commissioning.

    Each stage closes before the next one opens — nothing is ordered before the design is locked.

    1. 01

      Eligibility + HP

      Land, water source, pump HP, DISCOM check.

    2. 02

      SNA Filing

      State portal application + document upload.

    3. 03

      Sanction

      SNA sanction + vendor allocation + DBT release.

    4. 04

      Install + AMC

      Installation + commissioning + 5-yr AMC.

    Indicative pricing

    Project ranges and subsidy support.

    Indicative ranges only. Final cost depends on site, capacity, automation level, structural design, material grades and freight.

    3 – 10 HP Standalone

    PM-KUSUM B Solar Pump

    ₹1.8 – ₹6 L
    Indicative project range
    Up to 60% (Centre + State)
    • MNRE-approved pump + modules
    • GI mounting structure
    • Controller + cabling
    • Borewell / open-well integration
    • Subsidy filing + DBT
    Get an exact quote
    Existing Pump SolarisationMost enquired

    PM-KUSUM C Grid-Connected

    ₹3 – ₹15 L
    Indicative project range
    Centre + State + DISCOM PPA
    • Existing pump solarisation
    • Net-metering + DISCOM PPA
    • Surplus power export income
    • Reduces electricity bill to zero
    • Filing + commissioning
    Get an exact quote
    500 kWp – 2 MW

    PM-KUSUM A Feeder

    ₹2 – ₹10 Cr
    Indicative project range
    Centre VGF + State + PPA
    • Feeder-level solarisation
    • Land lease income for farmer
    • DISCOM PPA execution
    • PAN-India project management
    • Long-term O&M
    Get an exact quote

    All figures indicative and subject to revision. Subsidy approval depends on the sanctioning authority and current scheme guidelines.

    Why AgriMotion

    Engineered end-to-end, not pieced together.

    Most project failures start where one vendor’s scope ends and the next one’s begins. We carry the whole scope — and the paperwork that funds it.

    • One engineering teamDesign, EPC, refrigeration and agronomy under one roof — one party answers for the result.
    • DPR and BOQ in-houseBankable reports prepared for NHB, NABARD, AIF and state horticulture applications.
    • PAN-India executionSingle-point project ownership from survey to handover, with post-handover support.
    • Itemised quotationsLine-item pricing with make and specification — no vague lump sums.

    Engineered EPC vs local contractor vs DIY

    ScopeAgriMotionLocalDIY
    Bankable DPR + BOQ
    OEM-genuine components
    Engineering drawings (GA / P&ID / SLD)
    Subsidy filing (NHB / MIDH / AIF)
    Single-point project ownership
    Post-handover AMC
    Included Partly Usually not
    Questions

    Before you call us.

    Still unsure? Speak to an engineer — not a sales desk.

    What are the three PM-KUSUM components?

    Component A: feeder-level solar plants (500 kWp–2 MW) on barren/farmland with PPA to DISCOM. Component B: standalone off-grid solar pumps (3–10 HP) for farmers without grid. Component C: grid-connected solarisation of existing electric pumps with surplus power exported to DISCOM.

    How much subsidy do I get for a solar pump under Component B?

    Under PM-KUSUM Component B, farmers typically get 30% Central + 30% State subsidy + 30% bank loan + 10% farmer contribution. Effective upfront cost is around 10–40% depending on state. Some states (Haryana, Maharashtra, Rajasthan) offer enhanced top-ups.

    Can existing electric pump be solarised?

    Yes — that is exactly what Component C is for. Existing grid-connected pumps are solarised; energy consumed by the pump comes from solar, and surplus power is exported to DISCOM grid under net-metering, earning monthly income for the farmer.

    Who installs the solar pump?

    PM-KUSUM mandates MNRE-empanelled vendors for installation, with state-nodal-agency allocation. AgriMotion is positioned as an MNRE-empanelled EPC partner in select states and works with empanelled partners elsewhere.

    How long does PM-KUSUM take?

    Application acknowledgment 7–15 days. Sanction and vendor allocation 30–60 days. Installation and commissioning 30–45 days after material delivery. End-to-end 90–120 days from filing.

    Is there income from feeder solarisation (Component A)?

    Yes. Farmers leasing land for Component A solar plants typically earn ₹0.6–1.5 lakh per acre per year as lease rent, depending on state and tariff. The 25-year PPA secures long-term income with no operational responsibility.

    Project pricing & subsidy disclaimer

    Pricing ranges shown are indicative only and depend on site, scale, material grades, structural design, freight and current market conditions. Subsidy approval depends on the sanctioning authority and current scheme guidelines.

    Sources

    The documents behind the figures.

    Official scheme documents for the rates on this page. Scheme rules change — confirm the current circular with the sanctioning authority before you apply.

    1. 01
      PM-KUSUM scheme guidelines

      “Pradhan Mantri Kisan Urja Suraksha evam Utthaan Mahabhiyan (PM-KUSUM) — scheme guidelines”

      Ministry of New and Renewable Energy, Government of India · Not yet in our source ledger — confirm current terms with the implementing agency

    Solar for agriculture

    Everything we’ve published on this

    Solar for agriculture overview
    Start a project

    Tell us what you’re building.

    A crop, a capacity and a location are enough to begin. Share drawings or site photos on WhatsApp if you have them.

    • An engineer calls backUsually the same working day — someone who can talk loads, layouts and schemes.
    • An indicative estimateCapex range, scheme fit and next steps, before any paid DPR work.
    • No obligationYour details are used only to reply to this enquiry.
    Your details
    Your project

    No spam. Indicative estimate only — final quotation depends on site condition, specifications and current material rates.